Face recognition Thermal Body Temperature Measurement camera
Non-contact automatic body temperature detection
Features:
- Non-contact automatic body temperature detection, brush human
face and perform high-precision infrared human temperature
acquisition at the same time, fast and high effect
- Temperature measurement range 30-45 (℃) Accuracy ± 0.3 (℃)
- Automatically identify unmasked personnel and provide real-time
warning
- Support temperature data SDK and HTTP protocol docking
- Automatically register and record information, avoid manual
operation, improve efficiency and reduce missing information
- Support mid-range temperature measurement and real-time warning
of high temperature
- Support binocular live detection
- Unique face recognition algorithm to accurately recognize faces,
face recognition time <500ms
- Support human motion tracking exposure in strong backlight
environment, support machine vision optical wide dynamic ≥80dB
- Adopt Linux operating system for better system stability
- Rich interface protocols, support SDK and HTTP protocols under
multiple platforms such as Windows / Linux
- 7-inch IPS HD display
- IP34 rated dust and water resistant
- MTBF> 50000 H
- Support 22400 face comparison library and 100,000 face
recognition records
- Support one Wiegand input or Wiegand output
- Supports fog through, 3D noise reduction, strong light
suppression, electronic image stabilization, and has multiple white
balance modes, suitable for various fields
Scene demand
- Support electronic voice broadcast (normal human body temperature
or super high alarm, face recognition verification results)
Specification:
| Model | AY-TN2M7A |
| Hardware |
| Chipset | Hi3516DV300 |
| System | Linux operation system |
| RAM | 16G EMMC |
| Image sensor | 1/2.7" CMOS |
| Lens | 4.5mm |
| Camera Parameters |
| Camera | Binocular camera supports live detection |
| Effective pixel | 2Mega pixel,1920*1080 |
| Min. lux | Color 0.01Lux @F1.2(ICR);B/W 0.001Lux @F1.2 |
| SNR | ≥50db(AGC OFF) |
| WDR | ≥80db |
| Face Recognition |
| Height | 1.2-2.2 M, angle adjustable |
| Distance | 0.5-2 Meters |
| View angle | Vertical ±40 degree |
| Reco. Time | ＜500ms |
| Temperature |
| Range | 30-45(℃) |
| Accuracy | ±0.3(℃) |
| Distance | 0.3-0.8m |
| Response time | ＜300ms |
| Interface |
| Internet interface | RJ45 10M/100M Ethernet |
| Weigand port | Support input/output 26 and 34 |
| Alarm output | 1channel relay output |
| USB port | 1USB port (Can be connected to ID identifier) |
| General |
| Power input | DC 12V/3A |
| Power consumption | 20W(MAX) |
| Working temperature | 0℃ ～ +50℃ |
| Humidity | 5～90%, no condense |
| Dimension | 123.5(W) * 84(H) *361.3(L)mm |
| Weight | 2.1 kg |
| Column aperture | 33mm |
Precautions:
- The temperature measuring device should be used in a room with a
room temperature between 10 ℃ -40 ℃. Do not install the temperature
measuring device under the vent, and ensure that there is no
heating source within 3 meters;
- Personnel entering the room from a cold outdoor environment will
affect the temperature measurement accuracy. The forehead
temperature test should be performed after the forehead is
unobstructed for three minutes and the temperature is stable;
- The temperature read by the temperature measuring device is the
temperature in the forehead area. When there is water, sweat, oil
or thick makeup on the forehead or the elderly have more wrinkles,
the read temperature will be lower than the actual temperature.
Make sure there is no hair or clothing covering this area.
